Every fault below comes from real call-outs across Durban and surrounding areas. Some have a quick check you can try yourself before booking anyone — where that's true, we say so. When a visit is needed, the diagnosis is done with a signal meter, quoted before work starts, and covered by our 6-month workmanship warranty. New to this part? Start with the power supply board component guide.
1. TV completely dead — no standby lightNo standby LED
What you'll see: Nothing happens when you press power. There is no red or white standby light, no click and no sound.
Why it happens: A blown fuse, failed bridge rectifier or shorted switching transistor on the power board — very often after a power surge or when electricity returns after load shedding.
How we fix it: We measure the board, replace the failed components (or the board) and check why it failed, so a shorted part elsewhere doesn't blow the new fuse.
Full tv completely dead — no standby light troubleshooting guide →
2. Standby light on but the TV won't turn onSteady red standby LED
What you'll see: The standby light glows, but pressing power does nothing — or the light changes colour and the screen stays black.
Why it happens: The power board makes the low standby voltage but fails to deliver full power when the TV asks for it. Less often, the main board isn't sending the "power on" signal.
How we fix it: We test whether the power-on command reaches the board and whether the main voltages come up, then repair whichever board is at fault.
Full standby light on but the tv won't turn on troubleshooting guide →
3. TV turns on and off by itselfClicking / cycling
What you'll see: The TV clicks on, shows the logo or a picture for a few seconds, then switches off — sometimes repeatedly.
Why it happens: Weak capacitors on the power board that sag under load, or a protection circuit shutting the TV down because the backlight or main board is drawing too much current.
How we fix it: We load-test the power board, replace worn capacitors and check the backlight current so the protection circuit has no reason to trip.
Symptom doesn't match any of these?
Faults overlap — a "power supply board problem" is sometimes another board wearing a disguise. Describe what your TV is doing on +27 78 853 1196 (or WhatsApp a photo of the error screen) and we'll tell you which component it actually sounds like, free, before anything is booked.
